Pneumatic Resistance 3Mm Hollow Galvanized T Joint Tube Pipe Projection Welder
Product Introduction:
Imagine: you place a horizontal tube flat and insert a vertical tube between the top and bottom heads to form a T. Press the button and hear a "pop" sound. A spark flashes at the point where the two pipes come into contact, and the welding is completed. Then you take out the pipe and take a look - the area where it was just clamped by the upper and lower heads and the horizontal head, the pipe surface is clean, only the T-shaped welding part needs simple polishing. This is the working mode of this fixed T-type welding machine, specifically designed for 3mm+3mm galvanized hollow pipes. Simple, clean, and sturdy.
Features:
1. The vertical direction adopts a coaxial opposed design for the upper and lower heads, which balances the force when clamping the vertical pipe and prevents the pipe from tilting.
2. The horizontal and vertical heads form a 90 degree right angle layout to ensure the verticality accuracy of the horizontal and vertical pipes reaches ± 0.5 degrees.
3. All three electrodes are made of chromium zirconium copper alloy material, which has excellent conductivity and a service life of over 100000 times.
4. The body adopts a thickened steel plate welding structure, which has strong rigidity and long-term use without deformation, ensuring repeated welding accuracy.
5. The electrode arm spacing can be adjusted to meet the welding requirements of vertical pipes of different lengths, with high flexibility.
Technical Parameters:
| Item/Model | DN-40 | DN-63 | D(T)N-80 | D(T)N-100 | D(T)N-125 | D(T)N-160 | D(T)N-200 | |
| Rated power At 50% | KVA | 40 | 63 | 80 | 100 | 125 | 160 | 200 |
| Rated primary power | V | 380 | 380 | 380 | 380 | 380 | 380 | 380 |
| Secondary Voltage | V | 5.2 | 6.7 | 7.9 | 8.3 | 8.6 | 9.1 | 10.6 |
| Rated frequency | HZ | 50/60 | 50/60 | 50/60 | 50/60 | 50/60 | 50/60 | 50/60 |
| Max.Short Circuit Current | KA | 14 | 15 | 16 | 18 | 20 | 28 | 34 |
| Max. weld power | KVA | 62 | 86 | 170 | 280 | 300 | 330 | 410 |
| Throat | MM | 500 | 500 | 630 | 630 | 630 | 630 | 630 |
| Max.Froce at electrodes | N | 6000 | 6000 | 10000 | 10000 | 10000 | 12000 | 12000 |
| Working stroke | MM | 20 | 20 | 30 | 40 | 40 | 50 | 50 |
| Cooling Water Consumpion 2.5bar | L/min | 6 | 6 | 8 | 8 | 8 | 10 | 10 |
| Electrodes tlp | MM | Φ13*45 | Φ13*45 | Φ16*45 | Φ16*45 | Φ16*45 | Φ20*45 | Φ20*45 |
| Arms | MM | Φ50*150 | Φ50*150 | Φ80*220 | Φ80*220 | Φ80*220 | Φ80*220 | Φ80*220 |
| Projection Clamping Plate | MM | 125*125 | 125*125 | 200*200 | 200*200 | 200*200 | 200*200 | 200*200 |
|
Max.Welding Capaciry A3 steel |
MM | 2.5+2.5 | 3+3 | 4+4 | 4.5+4.5 | 5+5 | 5+5 |
6+6 |
General Structures:
Detailed Images:
CuCrZr Electrodes: The machine adopts three chromium zirconium copper alloy electrode heads, three chromium zirconium copper electrode heads (vertical up and down+horizontal), conductive and wear-resistant, quick disassembly design, and the pipe surface is intact during welding.
Cylinder:The cylinder adopts a combination of aluminum alloy cylinder barrel, low damping sealing ring, and light friction ring, with wear-resistant surface and long service life, achieving extremely high spot welding speed, electrode pressurization, smooth and fast.
Gas Storage Tanks: The projection welding machine is equipped with a dedicated gas storage tank, which is beneficial for reducing welding pressure fluctuations and ensuring stable welding force.
Waterway Components: All waterway components undergo surface treatment to prevent rusting, and waterway drainage is independently discharged to the water tank. Based on the outflow situation, blockages in the waterway can be observed and eliminated.
Scene Images:
Welding Test:
FAQ:
উইচ্যাটে যোগ করতে স্ক্যান করুন