Movable Flexible Multi-Joint Articulated Arm Resistance Welder Platform Type Spot Welding Machine For Sheet Metal
Product Introduction:
The Rocker Arm Spot Welding Machine has a simple and compact structure, clear gas and electrical layout, and modular design of key components for easy daily inspection and maintenance; Simultaneously equipped with multiple protection functions such as overvoltage, overcurrent, and overheating, it is safe and reliable to use, suitable for long-term stable operation in a 24-hour continuous production environment.
Features:
1. The whole machine adopts a sheet metal enclosed structure, with no exposed high-voltage components inside, to avoid accidental electric shock during operation.
2. The start button is located on the front of the body or at the base of the welding arm. The operator needs to release one hand to press the start button, avoiding both hands being under the welding head at the same time and objectively reducing the risk of injury.
3. The copper platform has fast thermal conductivity, and the temperature rise of the platform can be controlled during long-term continuous welding, which is not easy to cause discoloration on the back of the workpiece..
4. The air circuit is equipped with a triple component for pressure regulation and oil mist filtration, ensuring stable cylinder pressure and automatically lubricating pneumatic components to extend their lifespan.
5. Short circuit design for welding circuits, with the secondary of the intermediate frequency transformer directly connected to the electrode, reducing cable heating and improving energy utilization efficiency.
Detailed Images:
Pneumatic pressurization system(Cylinder): By driving the piston rod with compressed air, stable and adjustable welding pressure is applied to the electrode.; Pneumatic pressurization is stable and uniform, and the pressure can be infinitely adjusted to ensure that each solder joint is subjected to consistent force and the formation of weld nuggets is reliable; Cooperate with rapid response control to effectively improve welding consistency and yield rate.
Welding gun (vertical/horizontal): Traditional welding guns often have a fixed direction, making it difficult to balance flat overlap and deep cavity structure. However, vertical and horizontal welding guns that can be freely selected are completely different: they can install electrodes and stably conduct current and pressure, and can flexibly switch between vertical or horizontal directions according to the shape of the workpiece, easily reaching various angles of welding points, greatly reducing the trouble of workpiece flipping and fixture adjustment.
Full copper countertop: Traditional spot welding often requires additional electrodes or copper pads, and the back of the workpiece is prone to burns and discoloration. However, the all copper table integrates the conductive lower electrode, heat dissipation body, and workpiece support surface. Copper has fast conductivity, low resistance, and is more energy-efficient than conventional methods. Its excellent thermal conductivity can quickly dissipate heat to prevent back burns and discoloration, achieving seamless welding. At the same time, the flat and wear-resistant table allows the workpiece to be placed directly for operation without any additional accessories, making the operation more convenient and efficient.
Multi joint welding arm (parallel joint structure): It realizes flexible extension and rotation of electrodes in the horizontal plane, allowing welding points to cover any position on the workbench.; The unique parallel joint design allows for flexible rotation and a wide range of extension of the welding arm, covering any point on the workbench. It is easy and effortless to operate, especially suitable for multi-point welding of large or irregular workpieces.
Welding Test:
General Structures:
Technical Parameters:
| Items Models | DN(B)-100 | DN(B)-160 | DN(B)-200 | DN(B)-250 |
| Rated power (KVA) | 100 | 160 | 200 | 250 |
| Power input(V) | 3φAC 380V | 3φAC 380V | 3φAC 380V | 3φAC 380V |
| Max. short circuit current (KA) | 30 | 35 | 40 | 45 |
| Duty cycle(%) | 50 | 50 | 50 | 50 |
| Max. force(N) | 6000 | 6000 | 10000 | 15000 |
| Electrode length( MM) | 450 | 450 | 450 | 500 |
| Working stroke( MM) | 80 | 80 | 80 | 80 |
| Cooling consumption(L/min) | 20 | 20 | 20 | 20 |
| Max. welding capacity(MM) | 3.0+3.0 | 4.0+4.0 | 5.0+5.0 | 6.0+6.0 |
Scene Images:
Related Products:
FAQ:
উইচ্যাটে যোগ করতে স্ক্যান করুন