90 Degree Rotation Double Head Electric Carbon Steel Saw Blade Rotary Indexing Worktable Fixed Type Pneumatic Welding Machine

Pneumatic Medium Frequency Carbon Steel Saw Blade Rotary Indexing Worktable Two Electrodes Multi Point Welding Machine

Product Introduction:

The semi-automatic pneumatic spot welding machine is designed with dual head intermediate frequency output as its core, specifically for three-layer welding of 2+2+2mm carbon steel saw blades (with a large saw blade in the middle and a small saw blade on each side). Two welding heads are set for the upper and lower electrodes, and the distance between the head electrodes can be adjusted. Symmetrical pressure is applied on both sides to ensure uniform fusion of the three layers of metal; The machine is equipped with a workpiece rotation platform. After the operator places the workpiece, they click to start. The left and right machine heads simultaneously press down on the welding, and after completion, the platform automatically lifts. The platform rotates 90 °, and the machine head presses down again to complete the second set of welding points, thus ending one work cycle. The overall structure is compact and solid, with a design that balances aesthetics and practicality. The performance tuning is mature, with low temperature rise, low noise, and low long-term operation failure rate; Built in energy-saving standby mode, high power utilization rate, and the operation mode of rotating and moving workpieces keep the welding machine body fixed, avoiding frequent bending of cables and air pipes, improving system reliability, especially suitable for continuous production of large quantities of saw blades.

Features:

Detailed Images:

Symmetrical double heads: The rotating platform automatically carries the workpiece and rotates it 90 ° according to the program, ensuring that the secondary welding is perfectly aligned and the four point welding points reach the ideal uniform state; Combined with precise division positioning and smooth motion characteristics, welding consistency is reliably improved.

Workpiece rotation platform: The symmetrical double head design ensures simultaneous pressure up and down, forming two points per stroke to prevent offset and virtual welding from the root, and the spacing can be freely set; After 90 ° rotation welding, the four points are balanced and consistent, thanks to the stable voltage and current power system, the overall welding yield and reliability are greatly improved.

Dual cylinders: The upper and lower heads are independently driven by dual cylinders, with adjustable pressure settings to accommodate varying thickness combinations. The downward pressing is smooth and buffered to prevent impact damage to the workpiece, while the pneumatic response is sensitive, ensuring a compact and efficient welding cycle.

Waterway components: All waterway components undergo surface treatment to prevent rusting, and waterway drainage is independently discharged to the water tank. Based on the outflow situation, blockages in the waterway can be observed and eliminated.

Welding Test:

Welding Workpiece: The spot welder is also widely applied in various fields such as automotive components (e.g., nuts, housings, stud welding, and spot welding), home appliance manufacturing (compressor housings, electrical accessories), hardware sheet metal (iron wire products, galvanized plate assemblies), and aerospace precision parts, serving as a versatile, cost-effective industrial platform suitable for thin sheet stacking and multi-point symmetrical welding of various carbon steels, stainless steels, and galvanized plates.

General Structures:

Technical Parameters:

Scene Images:

Related Products:

Rocker Arm Spot Welding Machine

Adopting a single arm multi joint rocker arm structure and a horizontal platform type lower electrode combination, specially designed for thin plate welding, the front of the workpiece has no indentation, the back is smooth and deformation free, and there is no need to polish after welding; Its flexible rocker arm can easily penetrate into the interior of the box, coupled with pneumatic pressurization and microcomputer control, ensuring that the welding points are firm and stable. It is widely used in the processing of metal products with high surface requirements such as cabinets, elevator door panels, kitchenware, and automotive sheet metal.

Fireproof Door Spot Welding Machine

Elevator Door Panels Double Heads Spot Welding Machine

It  innovatively features dual electrode heads on the basis of a fixed spot welding machine, completing two welding points in one action. With the help of X/Y-axis moving fixtures and exchange racks, it achieves automated batch welding of elevator door panels. After manual loading and unloading, automatic displacement, pneumatic pressurization, thyristor controlled welding, and cyclic operation are carried out until completion. The whole machine has a compact structure, with a welding capacity of 0.5~1.5mm and an external size of 5250 × 3775 × 2067mm. It runs stably, efficiently and energy-saving, making it an ideal equipment for door panel manufacturing.

Galvanized Sheet Door Multi Head Welding Machine

This is an 11 head multi head welding machine designed specifically for welding galvanized sheet doors, using projection welding technology. The equipment supports manual loading and unloading of materials and automatic completion of welding operations. 11 welding heads can work synchronously, greatly improving production efficiency, ensuring firm and beautiful welding points, and effectively maintaining the anti-corrosion performance of the galvanized layer. It is an ideal choice for mass production in the door industry.

FAQ:

1. When can you arrange shippment?
The shippment is 15 days after getting deopsit, but customized machines should be more than 25 days.